Controlling Idling Hours on Scania Dump Trucks as an effort to Fuel Efficiency and Improving Occupational Safety and Health

Agus Amirudin; Faham Burhanudin; Nurhalimah Vivid Permatasari; Andhika Fitri Ariaputra; Syawal Kamiluddin Saptaputra

doi:10.37287/ijghr.v6i4.3294

Agus Amirudin PT. Putra Perkasa Abadi Jobsite MLP & Sahid University Jakarta
Faham Burhanudin PT. Putra Perkasa Abadi Jobsite MLP
Nurhalimah Vivid Permatasari PT PPA Jobsite MLP
Andhika Fitri Ariaputra PT PPA Jobsite MLP
Syawal Kamiluddin Saptaputra Halu Oleo University

DOI: https://doi.org/10.37287/ijghr.v6i4.3294

Keywords: idling hours, occupational safety and health, productivity

Abstract

Idling hours refer to the amount of time where a machine or vehicle is operational not active. The purpose of this research is to determine the control of Scania Dump Truck Idling Hours as an effort to fuel efficiency and improve occupational safety and health. This research method is quantitative descriptive. This research was carried out at PT. PPA Job Site MLP. The research subjects in this study were 38 Scania operating in the Engineering and Production sections as well as informants from Overall Grade, Engineering and Production. Data collection methods are document review, interviews and observation. The average use of diesel fuel in idling conditions is 2.57 liters/hour. In the period from January to February, the company experienced losses due to wasted diesel during idling hours amounting to 26,245 liters. The results of improvements that have been made to the idling hours of the DT Scania unit during the period January to April 2023 show significant development, where a decrease of 8% was obtained. Continuous monitoring needs to be carried out in order to maintain positive trends for operators and maintain employee enthusiasm.

References

Eko Handriyono, R., Ariyani, N., & Nia Pramestyawati, T. (2020). Kajian Emisi Gas Rumah Kaca Dari Kendaraan Bus Pada Saat Kondisi Diam (Idle) Berdasarkan Persamaan Taylor Di Terminal Purabaya. SPECTA Journal of Technology, 4(3), 81–88. https://journal.itk.ac.id/index.php/sjt

Rahayu, T., Ayu, I., & Hasiah, H. (2021). Pengaruh Idle Time Terhadap Produktivitas Bongkar-Muat Petikemas di PT. PELABUHAN TANJUNG PERAK SURABAYA. Jurnal Venus, 9(2), 64–80. https://doi.org/10.48192/vns.v9i02.444

Sidinra, A., Wijaya, A. E., & Sumarjono, E. (2022). Optimasi Fleet Management System ( Fms ) – Focus Guna Mengurangi Waktu Tidak Produktif ( Idle Time ) Pada Alat Angkut. 03(01), 43–52.

Benjamin, Legros. (2022). Dynamic policy for idling time preservation. Naval Research Logistics, doi: 10.1002/nav.22086

Pei-Chun, Lin. (2022). Fuzzy replacement of machine its running costs and the money value changes with time. Nucleation and Atmospheric Aerosols, doi: 10.1063/5.0108549

Weng, Pengcheng., Li, Jian., Han, Xu. (2019). Idling system and control method thereof.

Zhen, Zhang., Karen, Ficenec., Andrew, Kotz., Kenneth, W., Kelly., Darrell, B., Sonntag., Carl, R., Fulper., Jessica, L., Brakora., Tiffany, Mo., Sudheer, Ballare. (2022). Developing a heavy-duty vehicle activity database to estimate start and idle emissions. Transportation Research Part D-transport and Environment, doi: 10.1016/j.trd.2022.103251

Abdi, Pratama., Akihiro, Tokai., Hoa, Thi, Nguyen., Kojima, Naoya. (2018). Exploratory Study of the Idling Driving Effect on Gas Emission Levels in a Traffic Jam Environment: Case Study of Jakarta Metropolitan Traffic on Gasoline Passenger Cars. Asian Journal of Applied Sciences, doi: 10.24203/AJAS.V6I6.5603

T., R., Kukreja., Sanjana, Yadav., Arushi, Saloki., Swarnlata, Saraf. (2023). Chemical Pollutants: A Concern to The Environment. Journal of Ravishankar University, doi: 10.52228/jrub.2023-36-1-8

Pinar, Bostan. (2022). Health effects of outdoor air pollutants. World Journal of Environmental Research, doi: 10.18844/wjer.v12i2.8095

Robert, Fulks., Robert, Shelton., M., Bishop. (2023). Reductions in Emissions and Fuel Cost with Start/Stop System Technology for Diesel Frac Fleets. doi: 10.2118/212357-ms

Hardik, Gosar., Ravi, Sekhar, Chalumuri., Manoranjan, Parida. (2020). Fuel Loss Estimation Due to Idling Phase of Signalized Intersection. doi: 10.1007/978-981-15-3742-4_22

Francisco, Marcos. (2020). The Scania Decision on the Truck Manufacturers’ Cartel LA DECISI ÓN SCANIA SOBRE EL CÁRTEL DE LOS FABRICANTES DE CAMIONES). Social Science Research Network, doi: 10.2139/SSRN.3800244

Emad, Hamadaqa., Saleh, Mulhem., Ayoub, Mars., Wael, Adi. (2018). Clone-Resistant Joint-Identity Technique for Securing Fleet Management Systems. doi: 10.1109/AHS.2018.8541448

Indasah, Indasah. (2023). Analysis of the Role of Socialization, Experience and Perception of Nurses on the Application of Occupational Safety and Health. Babali Nursing Research, doi: 10.37363/bnr.2023.42233

Saiful, Hi., Soleman., Sudiar, Kokoda. (2022). Socialization of Environmental Impact Analysis (Amdal) on Manganese Mining Activities by PT. Elga Asta Media in Loloda Islands District, North Halmahera Regency. International Journal Of Community Service, doi: 10.51601/ijcs.v2i3.119

Xiwen, Li., Surojit, Saha., Di, Tang., Ouk, Choi., Kerry, E., Kelly., Ross, T., Whitaker. (2023). Real-Time Idling Vehicles Detection Using Combined Audio-Visual Deep Learning. arXiv.org, doi: 10.48550/arXiv.2305.14579

Zhenpo, Wang., Zhaowen, Liang., Jin, Huang., Enfei, Zhou., Kai, Liu. (2023). A novel real-time energy management and monitor framework for the fuel cell hybrid buses. doi: 10.1109/CIEEC58067.2023.10167268

Risma, Rahmalia, Fitriani. (2023). Pengaruh Implementasi Reward dan Punishment PT. XYZ Atas Kinerja Karyawan. Jurnal Teknik, doi: 10.37031/jt.v21i1.332

Art, Gogatz., M, Azavedo. (2023). Brainstorming: The Need for Professionalization of Facilitators and Participants.. Journal of business and management studies, doi: 10.32996/jbms.2023.5.2.9

Rondonuwu, P. W., & Tamod, Z. E. (2021). Evaluasi Penerapan Sistem Manajemen Keselamatan Pertambangan (Smkp) Dan Sistem Pengelolaan Perlindungan Lingkungan Hidup Pertambangan (Spplhp) Di Pt. Sumber Energi Jaya (Sej). AGRI-SOSIOEKONOMI, 17(2 MDK), 703-710.