Optimization of the Implementation of Occupational Health and Safety (K3) Standards

  • Mhd Taupik Sofyan Faculty of Public Health, Universitas Islam Negeri Sumatera Utara
  • Susilawati Susilawati Faculty of Public Health, Universitas Islam Negeri Sumatera Utara
  • Fitriani Pramita Gurning Faculty of Public Health, Universitas Islam Negeri Sumatera Utara
Keywords: community health center, health facilities, ; health standards, work safety

Abstract

Implementation of K3 standards is very important in every agency, especially at the lowest level of health facilities, namely community health centers. In accordance with Minister of Health Regulation No. 52 of 2018 concerning Occupational Safety and Health in Health Facilities, it is stated that every Health Fasyan is obliged to implement occupational safety and health efforts. The implementation of health center K3 is expected to reduce the number of accidents for workers. So that the safety and health of staff is guaranteed, services can be improved for patients at the health center. The Community Health Center Occupational Health and Safety Guidelines cover various aspects such as Occupational Health and Safety policies, risk management, planning, controlling and implementing K3. The implementation of K3 in community health centers is very influential in improving the quality of community health centers. Therefore, employees or people who work there must implement an K3 program. This research involved community health center officers in Pamatang Sidamanik, Simalungun Regency, North Sumatra Province. This research aims to find out how the Pamatang Sidamanik Community Health Center implements K3 standards. This research uses a quantitative methodology with a cross sectional design. The population in this study were community health center officers in Pamatang Sidamanik, totaling 40 respondents. From the total population obtained, the sample that the researcher took was the total of that population, because the researcher used a total sampling technique. Primary data collected directly by researchers through questionnaires from previous research. The Ministry of Health Regulatory Indicator is a questionnaire used by researchers. The results of the bivariate statistical test using Chi Square show that the average p-value is 0.000 (<0.05), so that Ho is rejected and Ha is accepted, this means that the implementation of K3 standards at the Pamatang Sidamanik health center is running optimally. The implementation of the K3 program in community health centers greatly influences both the quality and accreditation of community health centers. Researchers hope that the agencies studied will continue to evaluate the implementation of K3 and continue to run optimally. Suggestions for every health facility, especially the Pamatang Sidamanik health center, to increase the implementation of Occupational Safety and Health.

References

Ahmad, F. (2022). Implementation of Occupational Safety and Health (K3) for Increasing Employee Productivity. Jurnal Economic Resources. http://repository.nobel.ac.id/id/eprint/114/

Apriyati, R., & Latief, Y. (2020). Knowledge base integration management system quality, safety and environmental to improve organizational performance in construction company. … Conference Series: Materials Science and …. https://doi.org/10.1088/1757-899X/909/1/012050

Dewi, A., Latief, Y., & Sagita, L. (2020). Activity and risk identification in audit process on integrated management system to increase performance efficiency of construction services organization in Indonesia. IOP Conference Series: Earth and …. https://doi.org/10.1088/1755-1315/426/1/012014

Dina, D. M., & Purba, A. (2022). Occupational Health and Safety Risk Analysis in Construction Projects: A Systematic Literature Review. Indonesian Journal of Industrial …. http://repository.lppm.unila.ac.id/id/eprint/38842

Efendy, A., Djajakusli, R., Muis, M., & ... (2022). Implementation of occupational health and safety (OHS) management system to work stress among health workers during the COVID-19 pandemic at the Daya …. Gaceta Médica de …. https://search.ebscohost.com/login.aspx?direct=true&profile=ehost&scope=site&authtype=crawler&jrnl=03674762&AN=161044808&h=2WOmci6pgNTDGxex2zNZ6uGADmKhlJeJDM906fusx2eQKMS110i36%2FzZR1hwLPeOPb3aPWWDgh9kaIaJkQmC1g%3D%3D&crl=c

Jannah, M., Fahlevi, M., Paulina, J., & ... (2020). Effect of ISO 9001, ISO 45001 and ISO 14000 toward financial performance of Indonesian manufacturing. In … Reviews in Pharmacy. researchgate.net. https://www.researchgate.net/profile/Mochammad-Fahlevi/publication/346577288_Effect_of_ISO_9001_ISO_45001_and_ISO_14000_toward_Financial_Performance_of_Indonesian_Manufacturing/links/5fecbd4e299bf140885de280/Effect-of-ISO-9001-ISO-45001-and-ISO-14000-towa

Jenrivo, F., Indasah, I., & Nurwijayanti, N. (2020). Analysis of the Application of Safety and Health Management System Work Against a Work Behavior and Conditions of the Work Environment in the dr. Harjono …. Journal for Quality in Public Health. https://jqph.org/index.php/JQPH/article/view/65

Mahfirah’eni, R., & Suhardi, B. (n.d.). Correlation Overview between Knowledge and Attitudes towards Occupational Safety and Health (K3) with Occupational Accidents. In researchgate.net. https://www.researchgate.net/profile/Bambang-Suhardi/publication/353599904_Correlation_Overview_between_Knowledge_and_Attitudes_towards_Occupational_Safety_and_Health_K3_with_Occupational_Accidents/links/6104fa001e95fe241a9cf5a5/Correlation-Overview-betwe

Makrini, I. El, Mathijssen, G., Verhaegen, S., & ... (2022). A virtual element-based postural optimization method for improved ergonomics during human-robot collaboration. … Science and …. https://ieeexplore.ieee.org/abstract/document/9707485/

Mentari Ramadhania, Nazarwin Saputra, Dadang Herdiansyah, D. (2021). Analysis of Hazard Identification, Risk Assessment, Determining Control (Hiradc) on Work Activities at Ud Ridho Abadi South Tangerang in 2020. Environmental Occupational Health and Safety Journal, 2(1), 59–68.

Mora, Z., Suharyanto, A., & Yahya, M. (2020). Effect of work safety and work healthy towards employee’s productivity in PT. Sisirau Aceh Tamiang. In Burns. pdfs.semanticscholar.org. https://pdfs.semanticscholar.org/4a3a/915bfea4dce6dfaf359dd19d7c3692aa84e4.pdf

Nugroho, S. H., Suharjo, B., Bandono, A., & ... (2020). Analysis of Occupational Safety and Health Risk Management on the Indonesian Navy Ship Project Using Hazard Identification, Risk Assessment and Risk Control. Journal …. http://mail.asrojournal-sttal.ac.id/index.php/ASRO/article/view/275

Pramono, H. S., Ismara, K. I., Kuncoro, I. H., & Hariyono, W. (2020). The Effect of 5S Culture and Workshop Alignment on the Application of Industrial Work Culture in Vocational Education. staffnew.uny.ac.id. https://staffnew.uny.ac.id/upload/131873963/penelitian/Artikel_The Effect of 5S Culture and Workshop Alignment on the Application of Industrial Work Culture in Vocational Education.pdf

Purwayudhaningsari, R., Oetomo, W., & ... (2023). Risk and Cost Analysis Study Occupational Health and Safety (K3) On Passenger Terminal Building Works New Mentawai Airport Development Project. Jurnal Ekonomi …. https://jetbis.al-makkipublisher.com/index.php/al/article/view/69

Putri, E., Lestari, M., Novrikasari, N., & ... (2021). Bowtie Method: Study of Occupational Health and Safety Risks in Cement Production Process. Media Kesehatan …. http://journal.unhas.ac.id/index.php/mkmi/article/view/17948

Rahardja, U. (2023). Risk assessment, risk identification, and control in the process of steel smelting using the hiradc method. In APTISI Transactions on Management. ijc.ilearning.co. https://ijc.ilearning.co/index.php/ATM/article/download/2142/778

Rizky, M., Nur, M., Hamdy, M. I., Anwardi, A., & ... (2022). Improvement Of Occupational Health And Safety (OHS) System Using Systematic Cause Analysis Technique (SCAT) Method In CV. Wira Vulcanized. In … Engineering and …. ieomsociety.org. https://ieomsociety.org/proceedings/2022paraguay/289.pdf

Saputri, H., & Absori, R. (2022). Legal protection of occupational safety and health for pharmacists of clinics in Semarang. In Awang Long Law Review. download.garuda.kemdikbud.go.id. http://download.garuda.kemdikbud.go.id/article.php?article=3162277&val=14009&title=legal protection of occupational safety and health for pharmacists of clinics in semarang

Sholihah, Q., Hardiningtyas, D., Hulukati, S. A., & ... (2021). Automation of occupational safety and health (K3) electricity based on internet of things (IoT). … Science and …. https://doi.org/10.1088/1757-899X/1034/1/012125

Sutapa, I. N., Sutapa, I. K., & Suasira, I. W. (2020). Implementation of occupational health and safety (OHS) management system in The Villa Babakan Canggu Badung development project. Journal of Physics …. https://doi.org/10.1088/1742-6596/1450/1/012023

Tashia, O. S., & Jamaluddin, J. (2023). Evaluation Of Occupational Health And Safety Management System At Haji Hospital Medan. Jurnal Perilaku Kesehatan Terpadu. http://hasmed.org/index.php/Jupiter/article/view/60

Taufiqurrahman, M., & Wardani, R. (2020). Application of work safety and health management systems in the Technical Implementation Center of Primary Health Care Bendilwungu, Tulungagung, East Java. Journal for Quality in Public Health. https://jqph.org/index.php/JQPH/article/view/143

Wahrini, R., & Peng, C. G. (2023). Development of Interactive Learning Media in Occupational Health and Safety Subjectin Vocational High School. Jurnal Pendidikan Teknik Sipil. https://journal.uny.ac.id/index.php/jpts/article/view/59820

Wibowo, D. E., & Sajiyo, S. (2023). Evaluation Of The Implementation Of Occupational Health And Safety Management System (Smk3) At Pt. Pelabuhan. Jurnal Ekonomi. Https://Ejournal.Seaninstitute.Or.Id/Index.Php/Ekonomi/Article/View/2381

Yurizki, E., & Ikatrinasari, Z. F. (2022). Analysis Of ISO 45001: 2018 And Performance Management Implementation Toward Work Accidents And Performance Of Companies In Indonesia’s Leading …. In … On Industrial Engineering And …. Ieomsociety.Org. Https://Ieomsociety.Org/Proceedings/2022istanbul/943.Pdf

Published
2024-04-27
How to Cite
Sofyan, M. T., Susilawati, S., & Gurning, F. P. (2024). Optimization of the Implementation of Occupational Health and Safety (K3) Standards. Indonesian Journal of Global Health Research, 6(2), 1009-1020. https://doi.org/10.37287/ijghr.v6i2.3022

Most read articles by the same author(s)