Design of Asphalt Mixing Plant Industry Information System
Abstract
Asphalt mixing plant is a production equipment that produces hot mix in the form of a mixture of asphalt with some aggregate materials used as road pavement materials. The asphalt mixing plant produces hot mix which must be at a certain temperature so that it does not harden and cannot be used for road pavement. The accuracy in the delivery time of the product to the location where it will be held determines the quality of the production after it is held on the road media. The existence of an information system is a tool for controlling production costs, in this case hotmix products produced from asphalt mixing plant machines are needed to monitor every production process from several departments that have been worked on so that data management can be done quickly and accurately. Seeing the existing problems, this research aims to design and build an industrial information system for the asphalt mixing plant at PT. Wasis by Nugraha. Tools used in making this system is Visual Basic. The application design method uses the ProtoTyping method. The results of this study are that with the design and construction of an industrial information system for the asphalt mixing plant at PT. Wasis Karya Nugraha received a very good category in the functional suitability aspect and a very appropriate predicate in the usability aspect in helping to overcome conventional system problems in the administration of raw material procurement to the production process, sending finished products to consumers and financial reporting which can be caused by human error.
References
Adiartika, M. H. D., & Astuti, L. G. (2020). Usability Analysis of Udayana University SIMAK System Interface. Jurnal Elektronik Ilmu Komputer Udayana, 8(4), 487–495.
Alzahrani, A., Gay, V., & Alturki, R. (2022). The Evaluation of the Usability in Mobile Applications.
Ammann-group. (2022). Asphalt-Mixing Plants Stationary , Semi-Mobile , Mobile and Super-Mobile Ammann Group Worldwide Nine production locations and over 100 agencies and sales partners. www.ammann-group.com. Retrieved from www.ammann-group.com
amp.co.nz. AMP Business Plan (2021).
Ariyani, S., Sudarma, M., & Wicaksana, P. A. (2021). Analysis of Functional Suitability and Usability in Sales Order Procedure to Determine Management Information System Quality. INTENSIF, 5(2), 234–248. https://doi.org/https://doi.org/10.29407/intensif.v5i2.15537
Badan Pengembangan Sumber Daya Manusia Rakyat Kementerian Pekerjaan Umum dan Perumahan. (2016). Spesifikasi Ketentuan Umum Pusat Pendidikan dan Pelatihan Jalan, Perumahan, Permukiman dan Pengembangan Infrastruktur Wilayah Badan Pengembangan Sumber Daya Manusia Kementerian Pekerjaan Umum dan Perumahan Rakyat. In MODUL – 2 SPESIFIKASI KETENTUAN UMUM.
Deris, S., Omatu, S., & Ohta, H. (2000). Timetable planning using the constraint-based reasoning. Computers & Operations Research, 27(9), 819–840. https://doi.org/https://doi.org/10.1016/S0305-0548(99)00051-9
Ekowati, M. A. S., & Darsini. (2015). Pemakaian Alat Bantu Prototype Model Aplikasi Jarimatika Sederhana dan Menarik Pada Pembelajaran Berhitung Anak Usia Dini. KURVATEK, 929–951.
Florén, H., Frishammar, J., Lee, C., Ericsson, M., & Gustafsson, S. (2013). A framework for raw materials management in process industries.
Juman, K. K. (2020). Chapter 6 Prototyping , RAD , and Extreme Programming Systems Analysis and Design. Retrieved from https://bahan-ajar.esaunggul.ac.id/cca220/wp-content/uploads/sites/1519/2019/12/PERTEMUAN-6.pdf
NOVIANTY, A. V. (2021). Analisis pengendalian biaya overhead pabrik pada pt. Juragan kosmetik indonesia. Universitas Muhammadiyah Makassar.
Nursanti, Madani, M., & Abdi. (2022). Inovasi Layanan Sistem Informasi Kesehatan Terpadu Berbasis Website Di Dinas Kesehatan Kabupaten Bantaeng. Kajian Ilmiah Mahasiswa Administrasi Publik (KIMAP), 3(1). Retrieved from https://journal.unismuh.ac.id/index.php/kimap/index
Purnomo, D. (2017). Model Prototyping Pada Pengembangan Sistem Informasi. JIMP - Jurnal Informatika Merdeka Pasuruan, 2(2), 54–61. Retrieved from https://media.neliti.com/media/publications/264541-model-prototyping-pada-pengembangan-sist-1571738b.pdf
Puspaningrum, A., Rochimah, S., & Akbar, R. (2017). Functional Suitability Measurement using Goal-Oriented Approach based on ISO/IEC 25010 for Academics Information System. Journal of Information Systems Engineering and Business Intelligence, 3, 68. https://doi.org/10.20473/jisebi.3.2.68-74
Ramadhan, S. F., & Nurleli. (2023). Analisis Penerapan Anggaran untuk Meningkatkan Efektivitas dan Efisiensi Pengendalian Biaya Produksi. In Bandung Conference Series: Accountancy (Vol. 3, pp. 515–523). https://doi.org/https://doi.org/10.29313/bcsa.v3i1.6598
Rinaldo. (2021). Manajemen Pengawasan.
Rizal, F., Widodo, A., Adi, K., Riyanto, D., & Nurhayati, O. (2020). Usability testing mozita application based on use questionnaire model. Journal of Physics: Conference Series, 1524, 12104. https://doi.org/10.1088/1742-6596/1524/1/012104
SEVRANI, K., Kordha, E., & Gorica, K. (2011). Information Systems and Information Technology as Strategic Tools - Their Use in Albanian Business. Journal of Knowledge Management, Economics and Information Technology, 1, 22.
Sriyeni, Y., Ilham, M., & Veronica, M. (2017). Evaluasi Kualitas Aplikasi Smartkit Menggunakan Metode Usabilty Testing. In Seminar Nasional Corisindo. Institut teknologi dan bisnis stikom bali.
Tukino, & Hilabi, S. S. (2020). Production RAW Material Inventory Control Information System at PT. SIIX EMS Indonesia. Buana Information Tchnology and Computer Sciences (BIT and CS), 1(1), 8–11.
Wardani, A. A. A. M. C., Thanaya, I. N. A., Astana, N. Y., & Yana, A. A. G. A. (2019). Production Stage and Risk Identification on Asphalt Mixing Plant in Bali. International Journal of Applied Business & International Management, 4(3), 1–14.
Wulandari, D. A. N., Bahar, A. A. H., Arfananda, M. G., & Apriyani, H. (2021). Prototyping Model In Information System Development Of Al-Ruhamaa’ Bogor Yatim Center Foundation. Jurnal Pilar Nusa Mandiri, 17(2), 127–136.
